Bluetooth Controller
More Products Info
FAQs on Bluetooth Controller
Basics & Usage
The Bluetooth Controller is a wireless controller for BleeqUp Ranger. It lets users start or stop recording hands-free, making adventures safer and easier.
It allows you to wirelessly control your Ranger to start or stop recording hands-free, ensuring safer and smoother adventures.
Yes. The controller is shown and described as a handlebar-mounted wireless controller that helps control Ranger without stopping.
Yes. The Bluetooth Controller FAQ includes a handlebar mounting tutorial.
Connection & Pairing
It connects via Bluetooth. The controller uses Bluetooth 5.3 and supports BLE.
For initial pairing, please keep the Bluetooth Controller and Ranger glasses within 1 meter of each other. Once successfully paired, the controller uses Bluetooth 5.3 technology to maintain a stable, wireless connection during your rides.
Yes. If it has been successfully paired, press any button to turn it on after powering off; if the glasses are nearby, it will automatically reconnect.
The pairing FAQ states that the glasses’ internal Status LED flashes blue in pairing mode, and the Bluetooth Controller’s Status Indicator LED flashes green in pairing mode.
The troubleshooting FAQ says to confirm in the app that the controller is successfully paired with the glasses.
Battery & Durability
Yes. It has an IP67 water and dust resistance rating.
Battery life depends on usage. Under typical conditions—10–15 uses per week, about 50 minutes each time—the battery lasts approximately 5 months.
The troubleshooting FAQ states that the controller uses a CR2032 button cell.
General Troubleshooting
Power & Button Issues
Check whether the CR2032 button cell has enough power, whether it is installed with the correct polarity, and whether the battery cover is securely closed.
Long-press the power button to turn off the controller, then press any button to turn it back on and try again. Also check the battery, battery polarity, whether the glasses are powered on, and whether the controller is paired in the app.
Check whether the CR2032 battery has enough power, whether it is installed correctly with the correct polarity, and whether the battery cover is securely closed.
Check battery power, polarity, battery cover closure, whether the glasses are powered on, and whether the controller is successfully paired in the app.
Pairing & Connection Issues
Make sure both the controller and glasses are powered on, within 1 meter of each other, and both have entered pairing mode. For the glasses, press and hold the Intercom Mute button and Capture button for 5 seconds until the internal Status LED flashes blue. For the controller, press and hold the Intercom Mute button and Capture button for 5 seconds until the Status Indicator LED flashes green.
The controller may disconnect if it is too far from the glasses. If it stays disconnected for more than 2 minutes, it will automatically power off to save power. Bluetooth signal interference may also cause a brief disconnection, but it should reconnect automatically.
If the controller was successfully paired before, press any button to power it on. If the glasses are nearby, it should automatically reconnect.
The official page notes that distance and surrounding Bluetooth signal interference may cause brief disconnections. Keep the controller close to the glasses and reduce Bluetooth interference where possible.
Power on both devices, keep them within 1 meter, then put both into pairing mode. Press and hold the Intercom Mute and Capture buttons for 5 seconds on both devices; the glasses LED should flash blue and the controller LED should flash green.
Control & Support
Confirm that the glasses are powered on and that the controller is successfully paired with the glasses in the app. If pairing failed, repeat the pairing steps.
Provide your order number, model number or SKU, serial number, a video if available, app version if required, and a brief description of the issue.
Still Have Questions?
Explore our frequently asked questions to learn more about troubleshooting, orders, warranty, and more.
Connect With Our Professional Team
Not seeing what you're looking for?
Our experts are ready to help.
